How to solve the automatic feeding difficulty of screw oil press machine?
How to solve the difficulty of automatic feeding of screw oil press? When the cold pressing of screw oil press machine needs to circulate the material, then the difficulty of automatic feeding becomes a difficult problem. How to solve the problem of automatic feeding of screw oil press? We are in the Rui grain and oil machinery manufacturers have developed a spiral oil press supporting the cycle feeding machine, to help customers solve the problem of difficult feeding. Spiral oil press automatic feeding principle: a steel pipe, and then installed in the steel pipe inside the spiral column, there is a bin under the test, the oil will be poured into the bin, and then the screw conveyor will be transported to the top of the oil will fall into the bin outside the inlet, which saves manpower, do not have to lift the oil will be poured into the bin, just need to be very easy to pour the oil into the bin of the screw conveyor will be their own feeding, and can also control the intensity of feeding, and can also control the intensity of feeding, and can also be used in the screw conveyor to help customers solve the problem. And you can also control the feeding strength, there is a gate at the mouth of the silo, if you want to make the feeding speed faster, you will open the gate, if you want to feed slower, you will put the gate smaller, this can be freely controlled. With the feeding machine, screw oil press machine cold press and hot press can be carried out, help grain and oil plant to expand business, improve production, and this feeding machine is simple and exquisite, save electricity and energy, durable, not easy to fail, by the majority…
