After being used for a period of time, hydraulic oil presses may accumulate grease, residue and other dirt, affecting their performance and efficiency. To ensure that the hydraulic oil press stays in good working condition, it is recommended to clean it regularly. The following are the cleaning methods for hydraulic oil press:
1. Power off and disassemble: Before starting the cleaning, make sure the hydraulic press is powered off and stopped. Then, disassemble the main parts related to the hydraulic oil press, such as the oil cylinder, piston, and screen.
2. Cleaning the oil cylinder and piston: Use a brush, rag or sponge with an appropriate amount of mild detergent to clean the oil cylinder and piston thoroughly. When cleaning, please pay attention to the instructions of the cleaner and follow the correct usage and dilution ratio.
3. Cleaning the strainer: The strainer is an important part of the hydraulic oil press and is used to filter impurities. Use a brush, rag or sponge with the right amount of mild detergent to clean the screen thoroughly. When cleaning, please be careful not to damage the structure of the screen.
4. Cleaning other parts: Clean other parts related to the hydraulic press (e.g. valves, seals, etc.). Please choose the appropriate cleaning method according to the material and structure of the parts.
5. Clean water rinsing: Use clean water to rinse all parts of the hydraulic press to remove residual cleaning agents and dirt. A brush or rag can be used to assist in the rinsing process.
6. Natural drying: Place the cleaned hydraulic oil press parts in a well-ventilated place to dry naturally. Avoid using heat sources (e.g., heaters or sunlight) to accelerate drying to prevent damage to the component materials.
7. Reassembly: After ensuring that all parts are completely dry, reassemble the hydraulic press in the correct order. Be careful not to miss any parts or screws during reassembly.
8. CHECK PERFORMANCE: After cleaning and reassembling the hydraulic press, check for proper performance. If problems are found, contact an authorized hydraulic press service center or a professional repairer to take care of the problem.
Please note that it is important to follow the manufacturer’s recommendations when cleaning the hydraulic press. Excessive cleaning or the use of improper cleaning agents may damage the hydraulic press materials and compromise its safety performance. If in doubt, contact an Authorized Hydraulic Press Service Center or a service professional for assistance.
gao
Henan Zhongrui Grain is a high-tech enterprise specializing in the research, development, manufacture and sales of oil press equipment, and has been deeply engaged in the field of oil processing for more than ten years. The company integrates design, production and testing, and its products cover screw oil press, hydraulic oil press, automatic refining production line, etc., which are suitable for rapeseed, peanut, soybean, sesame and other oilseeds, and help customers to realize efficient, energy-saving and environmentally friendly oil and grease production.
