Peanut oil press to do a good job of using the preparatory work before what?

Peanut oil press in the beginning of the use of a series of preparatory work, so as to ensure that the oil press in the future operation of the process can be carried out smoothly. To this end, my company Jinan Huaao peanut oil press manufacturers specializing in peanut oil press for you to talk about if you are ready to prepare for the preliminary work of the peanut oil press.

Peanut oil press before the start of the preparatory work to start the motor of the peanut oil press, the direction of rotation of the large triangular belt wheel should be consistent with the direction of the marking, for the oil press idling test, generally running for about half an hour. During the operation, you should pay attention to observe the sound and temperature of the oil press, if you find any abnormal phenomenon, you should stop the machine to check and eliminate the peanut oil press after installation, fill the lubricating oil according to the regulations, check whether the parts are fastened, the operating handle, the plug plate is flexible.

At the same time, in the peanut oil press, check and adjust the looseness of the belt loosen the anti-loosening nut on the peanut oil press, wrench the handle in the direction indicated by the arrow, so that the slag tip is in contact with the cake ring, and then return 3-4 turns, and then forward half a turn, to ensure that the slag tip is in contact with the cake ring clearance. When checking the peanut oil press, move the big triangle belt wheel by hand to make the machine rotate, check whether the moving parts are normal, whether there is any foreign object jammed in the press chamber, if it is not normal, then it should be excluded.